VA22 2-port motor-driven ball valve|VA22
Compact size, modern design, insulated actuator housing. Simple manual control for commissioning or emergency operation. Universal electrical connection by integrated relay (220 … 240 V~). The control is effected via an on-off contact. The limit switch signal output can be used for control purposes (max. 1 A). The position of the ball valve is visible with the indicator flag (white). The actuator can be replaced quickly without demounting of the valve. No flow reduction, full flow according to the versions DN25 and DN32.
Actuator
Ingress protection: IP 44
Ambient temperature: 0 … +50 °C
Operating voltage: 220 … 240 V~
Motor: Synchronous motor
Load for limit switch: 5 (1) A 220 … 240 V~
Nominal power: 7,5 VA max.
Insulation class: II insulated
Actuation time: 30 s /90°
Operation mode: open – closed
Torque: 6 Nm (max. 8 Nm)
Electrical connection: 4 x 0.5 mm²
Valve
Maximum temperature flow/return: 0°C …+120 °C
Nominal pressure: PN 15 (max.PN 16)
Valve connection: IT on both sides
Flow: full flow, according to nominal width NW.
Valve: pressed brass (CuZn40Pb2)
Valve connection: brass (CuZn40Pb2)
Valve spindle: brass (CuZn40Pb2)
Valve ball: brass, hard-chromium-plated
Ball sealing: PTFE-ring teflon sealing
Spindle sealing: 1 x O-ring EPDM, 1 x O-ring Viton and 1 x O-ring PTFE
Sealing spindle to valve: 1 x O-ring EPDM, the axial stress between valve spindle and slot is compensated by another sealing.
The 2-port motor-driven ball valve RESOL VA22 is produced according to international standards and offers universal application possibilities in heating, warm water, solar and irrigation systems. A large number of application possibilities in the field of energy distribution is provided to the user.
VA22.kon2s 80.6KB 
