VA32 3-port motor-driven valve
Compact size, modern design, insulated actuator housing. Simple manual operation for commissioning or emergency operation. Electrical universal connection by an integrated relay. The control is affected by an on-off contact. The limit switch signal output can be used for control purposes (max. 1 A). The position of the ball valve is visible with the indicator flag (white). The actuator can be quickly replaced without disassembly of the valve. No flow reduction, full flow according to the versions DN20-DN32.
• Compact size – 3/4” – 5/4”
• Modern design
• Easy for installation and comissioning
Actuator
Power consumption:
Relay on, motor running: 9 VA
Relay on, motor in standby: 5 VA
Relay off: 0 VA
Ingress protection: IP 44
Protection class: II
Ambient temperature: -10 °C … +60 °C
Load for limit switch: 5 (1) A, 240 V~
Actuation time: 18 s / 90 °
Operation mode: open – closed
Protection class: IP 44 / IEC 60529
Electrical connection: 4 x 0.5 mm², L = 2.0 m
Limit switch: 5 (1)A, 240 VA
Regulating angle: 90 °
Torque: 6 Nm (max. 8 Nm)
Operating voltage: 230 V~
Torque: 6 Nm (max. 8 Nm)
Output signal: Phase L, 1 (1) A
Valve
Maximum pressure: 6 bar
Housing: forged brass
Maximum operation temperature: 2 °C … 110 °C
Max. operating temperature: 0°C … 110°C
Max. operating pressure: 6 bar
Rotor with axle: brass
Axle sealing: 4 x O-rings, EPDM
Possibility of motor control: UV-3
For reduction of axle friction: PA-plate
The 3-port motor-driven valve VA32 is used in solar and heating systems, in which smaller parts of systems can be separately controlled or single equipment can be switched on or off.
